Fork Oil Seals

Fork Oil Seals

We stock fork oil seals for all makes and models of Motorcycles.

If you know your size chose it from the chart below or search for your exact bike model in the dropdowns above.

Seal Size	IDxODxHeight	(mm)
33x43x9	38x50x8	48x57.7x9.5/10.3
33x44x9	38x52x11	48x58.4x8/11
33x45x10.5/12	39x51x8/10.5	48x58x10.5
33x45x8	39x52x11	48x58x8.5
33x46x10.5	40x49.5x7/9.2	49x60x10
34x46x10.5	40x52x10/10.5	50x59.6x7/10.5
35x47x10.5	40x52x7	50x60x7/10.5
35x47x7	41.7x55x10/10.5	50x63x11
35x47x7/10	41.7x55x8/10	61x47x11
35x48x11	41x51x6
35x48x13/14.5	41x53x8/10.5
35x48x8	41x54x11
36x46x7/9	43x52.7x9.5x10.3
36x48x10.5/11	43x54x11
36x48x8/9.5	43x54x9.5/10
37.8x48x6/6.5	43x55x10.5/12
37x48x10.5/12	43x55x9.5
37x49x8	45x57x11
37x50x11	45x58x8.5/11
38.6x48x7	46x58.1x9.5/11.5
38x50x10.5	47x58x10

All of our fork seals are made from the very best 'Low Stiction' material and where applicable are tripple lipped and double sprung. Our seals have been developed specifically for motorcycles and will out perform most seals on the market.

All of our seal kits come complete with a tube of Pyramid Parts ® 'Red Rubber Grease', when used correctly this grease will greatly increase the life of your seals (up to 3x OEM in our trials).

Note: The Pyramid Parts ® 'Red Rubber Grease' is specifically designed to 'Grab' dust and dirt that passes via your dust seals/boot and keep it there avoiding it getting through to the fork oil seals. We recommend that the grease is spread evenly on the underside of your fork dust seals/boots (not on the oil seals) as you dont want the dirt kept around the oil seals as this will ruin them quicker.

It is also recommended to change the fork dust seals at the same time as the oil seals, please see our Combo Kits for special deals.